Knot instructions: How to tie an improved clinch knot

Video shows step-by-step instructions to the improved clinch

From News Reports

August 07 at 10:46 am
Video Included Video Included  | Mobile Reader | Pring this storyPrint 


Watch the attached vid to for step-by-step instructions on how to tie the improved clinch knot.
Watch the attached vid to for step-by-step instructions on how to tie the improved clinch knot.

The improved clinch knot is probably one of the first knots an angler learns, and is a quick, easy way to make a strong connection between line and hook.

Read the instructions below, then watch the accompanying video for great step-by-step visuals.

The improved clinch is a popular method for tying line to a lure, hook or swivel.

It’s ‘improved’ because the tag end in this knot is run through the loop created in the final step.

It’s great with lighter monofilament and fluorocarbon lines, but sometimes more difficult to tie with limp braids.

Remember to always moisten your line before pulling it tight, especially for fluorocarbon line that’s easily damaged by heat from friction.

How to tie an improved clinch knot:

1. Pass the end of the tag line through the eye of the hook or swivel. 

2. Pull about six inches of line through and double it back against itself. Twist the hook five to seven times. (You can also wrap the tag end around the mainline while holding the hook steady – either way works.)

3. Pass the end of the line through the small loop formed just above the eye of the hook, then through the loop just created. Be careful the coils don't overlap. 4. Moisten and pull the tag end and mainline so that coiled line tightens against the eye. Trim excess.






View other articles written From News Reports